HairUWear
Colors & Care
Tru2Life Heat-Friendly Synthetic Hair
Tru2Life synthetic fiber looks and feels like real hair. The texture is light, soft and lustrous without being shiny, plus it’s heat-friendly! Straight styles can be curled and curly styles can be straightened using your flat iron, curling iron or blow dryer.
- Take special care with lace front wigs and hairpieces. The lace is delicate and should not be tugged or pulled.
- Sudden bursts of heat, such as opening an oven door, may damage heat-friendly synthetic fiber.
- We do not recommend sleeping, showering, or swimming while wearing.
- For longer styles, comb through nape area often using your fingers or a wide-tooth comb.
- Hair color cannot be used on synthetic fiber.
Gently remove tangles using your fingers or a wide-tooth comb. (Do not use a brush.) Start at the ends and slowly work toward the base to avoid damage. Do not overstretch or pull on the fiber.
- Add 1 tbsp of HairUWear CLEANSE to a washbasin of cool water. Caution: Hot water will damage synthetic fiber.
- Soak wig or hairpiece in washbasin for 3-5 minutes. Do not scrunch or agitate. Caution: Soaking longer than 5 minutes can damage the wig or hairpiece.
- Rinse under cool running water until the water runs clear. Use a clean, colorfast towel to gently press out excess water. Do not twist or wring.
- Apply a light mist of HairUWear RESTORE and comb through using a wide-tooth comb starting at the ends. Caution: Do not apply RESTORE directly to hand-tied areas as this may loosen the knots and cause shedding.
- For wavy/curly styles, be careful not to overstretch or pull on the fiber.
- The damp wig can then be placed on a HairUWear Wig Stand to dry. Hairpieces can be clipped on a hanger to dry, however hand-tied hairpieces should instead dry flat on a colorfast towel to prevent any damage to the delicate construction. Caution: Do not dry wig on a solid form or mannequin head to avoid overstretching the cap.
- Shake to release fiber. Style with your fingers to achieve the desired look.
- HairUWear offers a variety of styling brushes and combs specially designed for synthetic wigs and hairpieces.
- Tru2Life fiber can be curled, waved, flat-ironed or blown dry to achieve a different texture. Once heat-styled, the wig or hairpiece will keep the new texture even after washing.
- Tru2Life fiber can withstand a low-medium heat setting up to 350°F/180°C. Caution: Fiber will be damaged if the heat setting is too high. Do not heat-style while wearing as heat-friendly synthetic fiber will get very hot.
- To straighten: take a 1-inch section and run a flat iron from the base to the ends. Allow to cool.
- To curl: wrap a 1-inch section around a curling iron and hold for 10 seconds. Carefully slide the iron out and hold the curl shape with a hairpin or clip until completely cool to set the curl.
- HairUWear offers medium hold, strong hold and anti-frizz styling sprays specially formulated for synthetic fiber.
- For wavy/curly styles, refresh the texture as needed by spritzing with a 50/50 mix of water and RESTORE while finger-styling. A small amount of CURL spray may be used when styling. Do not overuse.
- After each wearing, gently comb through the wig or hairpiece using your fingers or a wide-tooth comb.
- To avoid unwanted kinks or crimps, store on a HairUWear Wig Stand (or clip hairpiece on a hanger).
- To maintain wavy/curly textures, style only when the hair is completely dry using only your fingers. Do not comb or brush dry hair as this can loosen the texture.
- After extended wear, matting and frizzing can occur. To detangle and recondition: wash as recommended, spray with HairUWear RESTORE, then comb through with a wide-tooth comb starting at the ends.
Tru2Life Hair Colors
Tru2Life Shadow Shades
Shadow Shades have a darker color depth at the root.
Kanekalon Vibralite Fiber
Exclusive to HairUWear, Kanekalon Vibralite® simulates protein rich hair for a natural look and feel. All “S+” multi-dimensional blends reflect the latest coloring techniques being used in top salons around the country. They are specially blended throughout the style with highlights and lowlights that complement the basic color.
- Take special care with lace front wigs and hairpieces. The lace is delicate and should not be tugged or pulled.
- Sudden bursts of heat, such as opening an oven door, will damage synthetic fiber.
- We do not recommend sleeping, showering, or swimming while wearing.
- For longer styles, comb through nape area often using your fingers or a wide-tooth comb.
- Never use thermal styling tools to heat style synthetic fiber. Using a blow dryer, curling iron, hot rollers, etc. will damage synthetic fiber.
- Hair color cannot be used on synthetic fiber.
Gently remove tangles using your fingers or a wide-tooth comb. (Do not use a brush.) Start at the ends and slowly work toward the base to avoid damage. Do not overstretch or pull on the fiber.
- Add 1 tbsp of HairUWear CLEANSE to a washbasin of cool water. Caution: Hot water will damage synthetic fiber.
- Soak wig or hairpiece in washbasin for 3-5 minutes. Do not scrunch or agitate. Caution: Soaking longer than 5 minutes can damage the wig or hairpiece.
- Rinse under cool running water until the water runs clear. Use a clean, colorfast towel to gently press out excess water. Do not twist or wring.
- Apply a light mist of HairUWear RESTORE and comb through using a wide-tooth comb starting at the ends. Caution: Do not apply RESTORE directly to hand-tied areas as this may loosen the knots and cause shedding.
- For wavy/curly styles, be careful not to overstretch or pull on the fiber.
- The damp wig can then be placed on a HairUWear Wig Stand to dry. Hairpieces can be clipped on a hanger to dry, however hand-tied hairpieces should instead dry flat on a colorfast towel to prevent any damage to the delicate construction. Caution: Do not dry wig on a solid form or mannequin head to avoid overstretching the cap.
- Shake to release fiber. Style with your fingers to achieve the desired look.
- HairUWear offers a variety of styling brushes and combs specially designed for synthetic wigs and hairpieces.
- HairUWear offers medium hold, strong hold and anti-frizz styling sprays specially formulated for synthetic fiber.
- For wavy/curly styles, refresh the texture as needed by spritzing with a 50/50 mix of water and RESTORE while finger-styling. A small amount of CURL spray may be used when styling. Do not overuse.
- Never use heat-styling tools to style synthetic fiber.
- After each wearing, gently comb through the wig or hairpiece using your fingers or a wide-tooth comb.
- To avoid unwanted kinks or crimps, store on a HairUWear Wig Stand (or clip hairpiece on a hanger).
- To maintain wavy/curly textures, style only when the hair is completely dry using only your fingers. Do not comb or brush dry hair as this can loosen the texture.
- After extended wear, matting and frizzing can occur. To detangle and recondition: wash as recommended, spray with HairUWear RESTORE, then comb through with a wide-tooth comb starting at the ends.
Kanekalon Vibralite Hair Colors
Kanekalon Vibralite Shadow Shades
Shadow Shades have a darker color depth at the root.
Human Hair
Human hair wigs and hairpieces boast the most natural look and feel as well as incredible ease of styling. There aren’t enough superlatives in the world to describe the fabulosity of our human hair wigs and accessories!
- Human hair is not ready to wear out of the box. Wash, rinse and style before wearing.
- Take special care with lace front wigs and hairpieces. The lace is delicate and should not be tugged or pulled.
- We do not recommend sleeping, showering, or swimming while wearing.
- Any cutting or chemical processes, such as perming or coloring, should be done by a professional hair stylist. We do not recommend lifting or bleaching human hair; depositing color provides the best result. No returns or exchanges will be allowed for worn or altered products.
Gently remove tangles using your fingers or a wide-tooth comb. (Do not use a brush.) Start at the ends and slowly work toward the base to avoid damage. Do not overstretch or pull on the hair.
Caution: Do not soak or submerge human hair wigs or hairpieces. Do not use hot water to rinse or wash as this will damage the base.
- Rinse by holding wig or hairpiece under cool running water. Allow the water to run from roots to ends.
- Place a small amount of shampoo for color-treated hair in your hand. Work it evenly through the hair in a gentle, downwards motion from the roots to the ends.
- Rinse under cool running water until the water runs clear. Gently squeeze to press out excess water. Do not twist or wring.
- Place a small amount of conditioner for color-treated hair in your hand. Work it evenly through the ends only in a gentle, downwards motion. Caution: Do not apply conditioner directly to base or root areas as this may loosen the knots and cause shedding.
- Leave conditioner on for 1-2 minutes or follow the conditioner manufacturer’s instructions. Caution: Leaving conditioner on longer than 3-5 minutes can damage the wig or hairpiece.
- Rinse by holding under cool, running water until the water runs clear. Gently squeeze or use a clean, dry towel to press out excess water. Do not twist or wring.
- The damp wig can then be placed on a HairUWear Wig Stand until completely dry. Hairpieces can be clipped on a hanger to dry, however hand-tied hairpieces should instead dry flat on a colorfast towel to prevent any damage to the delicate construction. Caution: Drying a human hair wig on a canvas block or mannequin head may overstretch the cap.
- HairUWear offers a variety of styling brushes and combs specially designed for wigs and hairpieces.
- Make sure hair is completely dry before using curling or flat irons. Blow dryers, curling irons and other thermal tools may be used on low settings. Remember, the hair may scorch if the setting is too high.
- To straighten: take a 1-inch section and run a flat iron from the base to the ends. Allow to cool.
- To curl: wrap a 1-inch section around a curling iron, hold for 10 seconds and release. Steam rollers or wet setting are the safest way to curl human hair.
- If desired, styling products may be used.
- After each wearing, gently comb through the wig or hairpiece using your fingers or a wide-tooth comb.
- To avoid unwanted kinks or crimps, store on a HairUWear Wig Stand (or clip hairpiece on a hanger).
- To detangle and recondition between washings: spray with a leave-in conditioner, then comb through with a wide-tooth comb starting at the ends.
Human Hair shades
Pre-dyed Human Hair Shades
Pre-dyed Human Hair Shadow Shades
100% Eastern european human hair shades
Certified Remy Human Hair
Raquel Couture wigs are made with 100% full cuticle hair that has been third party tested, hand-selected, certified. Because all the cuticles run in the same direction, hair is softer to the touch and natural looking. Minimal processing allows the hair to hold its lustrous shine and elasticity.
- Human hair is not ready to wear out of the box. Wash, rinse and style before wearing.
- Take special care with lace front wigs and hairpieces. The lace is delicate and should not be tugged or pulled.
- We do not recommend sleeping, showering, or swimming while wearing.
- Any cutting or chemical processes, such as perming or coloring, should be done by a professional hair stylist. We do not recommend lifting or bleaching human hair; depositing color provides the best result. No returns or exchanges will be allowed for worn or altered products.
Gently remove tangles using your fingers or a wide-tooth comb. (Do not use a brush.) Start at the ends and slowly work toward the base to avoid damage. Do not overstretch or pull on the hair.
Caution: Do not soak or submerge human hair wigs or hairpieces. Do not use hot water to rinse or wash as this will damage the base.
- Rinse by holding wig or hairpiece under cool running water. Allow the water to run from roots to ends.
- Place a small amount of shampoo for color-treated hair in your hand. Work it evenly through the hair in a gentle, downwards motion from the roots to the ends.
- Rinse under cool running water until the water runs clear. Gently squeeze to press out excess water. Do not twist or wring.
- Place a small amount of conditioner for color-treated hair in your hand. Work it evenly through the ends only in a gentle, downwards motion. Caution: Do not apply conditioner directly to base or root areas as this may loosen the knots and cause shedding.
- Leave conditioner on for 1-2 minutes or follow the conditioner manufacturer’s instructions. Caution: Leaving conditioner on longer than 3-5 minutes can damage the wig or hairpiece.
- Rinse by holding under cool, running water until the water runs clear. Gently squeeze or use a clean, dry towel to press out excess water. Do not twist or wring.
- The damp wig can then be placed on a HairUWear Wig Stand until completely dry. Hairpieces can be clipped on a hanger to dry, however hand-tied hairpieces should instead dry flat on a colorfast towel to prevent any damage to the delicate construction. Caution: Drying a human hair wig on a canvas block or mannequin head may overstretch the cap.
- HairUWear offers a variety of styling brushes and combs specially designed for wigs and hairpieces.
- Make sure hair is completely dry before using curling or flat irons. Blow dryers, curling irons and other thermal tools may be used on low settings. Remember, the hair may scorch if the setting is too high.
- To straighten: take a 1-inch section and run a flat iron from the base to the ends. Allow to cool.
- To curl: wrap a 1-inch section around a curling iron, hold for 10 seconds and release. Steam rollers or wet setting are the safest way to curl human hair.
- If desired, styling products may be used.
- After each wearing, gently comb through the wig or hairpiece using your fingers or a wide-tooth comb.
- To avoid unwanted kinks or crimps, store on a HairUWear Wig Stand (or clip hairpiece on a hanger).
- To detangle and recondition between washings: spray with a leave-in conditioner, then comb through with a wide-tooth comb starting at the ends.
Certified Remy Human Hair Shades
Certified Remy Human Hair Shadow Shades
