HairUWear

Colors & Care

Tru2Life Heat-Friendly Synthetic Hair​

Tru2Life Heat-Friendly Synthetic Hair

Tru2life logo

Tru2Life synthetic fiber looks and feels like real hair. The texture is light, soft and lustrous without being shiny, plus it’s heat-friendly! Straight styles can be curled and curly styles can be straightened using your flat iron, curling iron or blow dryer.

• Take special care with lace front wigs and hairpieces. The lace is delicate and should not be tugged or pulled.
• Sudden bursts of heat, such as opening an oven door, will damage heat-friendly synthetic fiber.
• We do not recommend sleeping, showering, or swimming during wear.
• For longer styles, comb through nape area often using your fingers or a wide-tooth comb.
• Hair color cannot be used on Tru2Life fiber.

• After each wearing, gently comb through the wig or hairpiece using your fingers or a wide-tooth comb.
• To avoid unwanted kinks or crimps, store on a HairUWear Wig Stand (or clip hairpiece on a hanger).
• To maintain wavy/curly textures, style only when the hair is completely dry using only your fingers. Do not comb or brush dry hair as this can loosen the texture.
• After extended wear, matting and frizzing can occur. To detangle and recondition: wash as recommended, spray with HairUWear RESTORE, then comb through with a wide-tooth comb starting at the ends.

• Shake to release fiber. Style with your fingers to achieve the desired look.
• HairUWear offers a variety of styling brushes and combs specially designed for synthetic wigs and hairpieces.
• Tru2Life heat-friendly synthetic fiber can be curled, waved, flat-ironed or blown dry to achieve a different texture. Once heat-styled, the wig or hairpiece will keep the new texture even after washing.
• Tru2Life heat-friendly synthetic fiber can withstand a low-medium heat setting up to 350°F/180°C. Caution: Fiber will be damaged if the heat setting is too high. Do not heat-style while wearing as heat-friendly synthetic fiber will get very hot.
• To straighten: take a 1-inch section and run a flat iron from the base to the ends. Allow to cool.
• To curl: wrap a 1-inch section around a curling iron and hold for 10 seconds. Carefully slide the iron out and hold the curl shape with a hairpin or clip until completely cool to set the curl.
• HairUWear offers medium hold, strong hold and anti-frizz styling sprays specially formulated for synthetic fiber.
• For wavy/curly styles, refresh the texture as needed by spritzing with a 50/50 mix of water and RESTORE while finger-styling. A small amount of CURL spray may be used when styling. Do not overuse.

Gently remove tangles using your fingers or a wide-tooth comb. (Do not use a brush.) Start at the ends and slowly work toward the base to avoid damage.

1. Add 1 tbsp of HairUWear CLEANSE to a washbasin of cool water. Caution: Hot water will damage heat-friendly synthetic fiber.
2. Place wig or hairpiece in washbasin and allow it to soak for 3-5 minutes. Do not scrunch or agitate. Caution: Soaking longer than 5 minutes can damage the wig or hairpiece.
3. Rinse by holding under cool running water until the water runs clear. Use a clean, colorfast towel to press out excess water. Do not twist or wring.
4. Apply a light mist of HairUWear RESTORE and comb through using a wide-tooth comb starting at the ends. Caution: Do not apply RESTORE directly to the hand-tied areas as this may loosen the knots and cause shedding.
5. For wavy/curly styles, be careful not to overstretch or pull on the fiber.
6. The damp wig can then be placed on a HairUWear Wig Stand to dry. Hairpieces can be clipped on a hanger to dry, however hand-tied hairpieces should instead dry flat on a colorfast towel to prevent any damage to the delicate construction. Caution: Do not dry wig on a solid form or mannequin head to avoid overstretching the cap.

Gabor Tru2Life Hair Colors

All Gabor Designer Series styles are made with heat-friendly Tru2Life synthetic fiber.

Tru2Life Shadow Shades

Shadow Shades® have a darker color depth at the root.

Kanekalon Flexlite Fiber

Kanekalon Flexlite logo

A lightweight, fine 24 denier fiber, Kanekalon Flexlite eliminates weight and volume without sacrificing coverage. This collection of multi-dimensional shades is created by hand-blending tone-on-tone hues to create brilliant colors that are a perfect balance of subtle depth and natural-looking highlights.

Gently remove tangles with fingers or a wide-tooth comb. Start at the ends and slowly work toward the roots to avoid damage. Do not brush.

1. Add a small amount of HairUWear Shampoo to a washbasin of cool water. Use shampoo sparingly.

2. Place product in washbasin and allow it to soak for 5 minutes. Do not scrunch or agitate the product.

3. Rinse by holding under running cool water until the water runs clear. Gently squeeze or use a clean, dry towel to press out excess water. Do not twist or wring.

4. Apply a light mist of HairUWear Leave-in Conditioner + Detangler avoiding the base and roots. Applying conditioner to the base may cause shedding.

5. Place wet wig on a folding HairUWear Wig Stand or hairpiece on a HairUWear Hanger until it is completely dry.

1. Shake product and style with your fingers to achieve the desired look. We recommend a HairUWear Styling Brush, HairUWear Styling Comb or fingers to style.

2. Synthetic-safe styling products can be used to set your hairstyle.

3. Never use heat to style your synthetic fiber. Heat will cause damage.

1. Soaking longer than the recommended time will damage the product.

2. Hot water will damage synthetic fiber.

3. Using heat tools such as a blow dryer, curling iron or hot rollers will damage synthetic fiber.

4. Sudden bursts of heat, such as opening an oven door, will damage synthetic fiber.

5. Do not dry on a solid form or mannequin head to avoid stretching the cap.

6. We do not recommend sleeping, showering or swimming while wearing product.

7. Store the wig on a HairUWear Wig Stand or hair piece on a HairUWear Hanger to avoid unwanted kinks or crimps.

8. Lace is delicate and should not be tugged or pulled.

9. Any cutting should be done by a professional hair stylist. No returns or exchanges will be allowed for worn or altered products.

Kanekalon flexlite Colors

Kanekalon flexlite Soft Shades

Gabor Soft Shades give each style a subtle progression of dimensional color that is darkest at the root, gradually lightens to a mid-tone range and is lightest at the ends for the natural look of hair lightened by the sun. With softer contrasts and a more gradual transition than traditional rooted colors, Gabor Soft Shades offer modern dimension and depth for a youthful, sun-kissed effect.

Kanekalon flexlite Gabor Plus Shades

Wig styles made with Gabor Plus shades have face-framing highlights and lowlights in the front that gradually progress to deeper and richer hues at the nape. Choose from an array of salon-inspired colors.

Kanekalon excelle heat-friendly Synthetic Hair

Kanekalon Excelle logo

Gabor’s special Kanekalon Excelle synthetic hair fiber is easier to care for than your own hair, and the hand-blended colors makes it the most natural-looking hair around. Use styling products as needed or even heat style. All Gabor Essentials styles are made with HairUWear’s exclusive Kanekalon Excelle heat-friendly fiber.

Gently remove tangles with fingers or a wide-tooth comb. Start at the ends and slowly work toward the roots to avoid damage. Do not brush.

1. Add a small amount of HairUWear Shampoo to a washbasin of cool water. Use shampoo sparingly.

2. Place product in washbasin and allow it to soak for 5 minutes. Do not scrunch or agitate the product.

3. Rinse by holding under running cool water until the water runs clear. Gently squeeze or use a clean, dry towel to press out excess water. Do not twist or wring.

4. Apply a light mist of HairUWear Leave-in Conditioner + Detangler avoiding the base and roots. Applying conditioner to the base may cause shedding.

5. Place wet wig on a folding HairUWear Wig Stand or hairpiece on a HairUWear Hanger until it is completely dry.

1. Shake product and style with your fingers to achieve the desired look. We recommend a HairUWear Styling Brush, HairUWear Styling Comb or fingers to style.

2. Synthetic-safe styling products can be used to set your hairstyle.

3. Never use heat to style your synthetic fiber. Heat will cause damage.

1. Soaking longer than the recommended time will damage the product.

2. Hot water will damage synthetic fiber.

3. Using heat tools such as a blow dryer, curling iron or hot rollers will damage synthetic fiber.

4. Sudden bursts of heat, such as opening an oven door, will damage synthetic fiber.

5. Do not dry on a solid form or mannequin head to avoid stretching the cap.

6. We do not recommend sleeping, showering or swimming while wearing product.

7. Store the wig on a HairUWear Wig Stand or hair piece on a HairUWear Hanger to avoid unwanted kinks or crimps.

8. Lace is delicate and should not be tugged or pulled.

9. Any cutting should be done by a professional hair stylist. No returns or exchanges will be allowed for worn or altered products.

Kanekalon excelle Hair Colors